ASR-010D
ASR-020D of AsReader series is the modular type barcode scanner for iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 5, iPhone 5s, iPhone SE and iPod touch 5 and 6 gen. Major 1D and 2D barcodes, such as PDF417, QR Code, Aztec, RSS, Composite and postal barcode, including American and British ones, are supported.
ASR-010D
Model NameASR-020D
BarcodeScan Engine2D CMOS
Minimum Resolution0.102mm~0.508mm (4mil~20mil)
Reading distance50~760mm(1.97″~29.92″) (*1)
Reading anglePitch:±60° Roll: 360° Skew motion:±60° (*1)
Reading code1D: JAN/UPC/EAN, CODE11, CODE39, CODE93, CODE128, ITF(INTERLEAVED 2of5), DISCRETE 2of5, CHINESE 2of5, MATRIX 2of5, CODABAR(NW-7), MSI, GS1 DATABAR OMNIDIRECTIONAL, GS1DATABAR LIMITED, GS1DATABAR EXPENDED 2D: PDF417, MicroPDF417, Datamatrix, QR Code, Micro QR Code, Aztec, RSS, Composite, TLC-39, MaxiCode/Postal: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX)
Light sourcesRED LED
BatteryBattery CapacityBuilt-in rechargeable lithium-ion battery 700mAh
Continuous operation time20,000 times(*2)
Power SourceMagconn cable、DC Power cable(*3)
Charging timeAbout 2 hours (Built-in battery)(*4)
Key input2 trigger key
CommunicationInterfaceMFi on Lightning (*5)
AppearanceDimensions(W)×(D)×(H)63.7×9.7×117.2mm
Weight(with Battery)About 70g
MaterialPC
Case colorWhite
LEDNon-blinking Blue LED: Connected with device (*6).
Blinking Blue LED: Reading Barcode.
Non-blinking Red LED: Battery is charging.
Faint Red LED: Battery is fully charged
EnvironmentOperating environment-10~45℃, 20~85 % RH(Charge at 0 ℃ or more)
Storage environment-20~60℃, 10~95%RH
IP RatingIP54 compliance
Anti-drop(Six-sided * 4 edge, once each) 1.5m (*7)
CertificateApple MFi / FCC / CE
RequirmentsDevicesiPhone 6/6 Plus/6S/6S Plus/5/5S/SE, iPod touch 5/6 gen, iPad mini 1/2/3/4, iPad Air 1/2 (*8)
OSiOS8.0 or later (except iOS9.2.x)
Bundled itemsMagconn cable / Earphone extension cable / Installation instructions /manual

*1 May depend on barcode type.
*2 Continuous operation time was tested with iPhone’s default brightness setting.
*3 Standard iPhone 1A charger is strongly recommended to be used when using Magconn cable.
*4 iPhone and AsReader batteries will charge simultaneously. iPhone and AsReader batteries will be recharged in 3.5 hrs and 2 hrs respectively in simultaneous recharging mode.
*5 SDK is required and available for free download. Please contact us.
*6 Blue LED will turn on after iPhone/iPod is connected. LED will turn off after the reading the first tag.
*7 iPhone screen could be broken, depending on the drop angle.
*8 It depends on the case, Please contact us for case availabilities.

Best price for the best 2D iPhone barcode scanners in Dubai, UAE, Middle East and Africa.