ASR-010D

AsReader ASR-030D /ASR-031D UHF reader

AsReader ASR-030D /ASR-031D UHF reader

sled,rfid ipad air,read rfid with iphone,iphone read rfid,ipad rfid,rfid jacket,iphone 7 rfid,ASR-030D / ASR-031D of AsReader series is the modular type RFID reader/writer for iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 5, iPhone 5s, iPhone SE, iPod touch 5th and 6th gen, and iPad Air2 and Pro9.7. It is either around 860 or 920MHz UHF band RFID reader/writer and has FCC and CE certification for each model.

Model NameASR-030D and ASR-031D
RFIDSpecISO 18000-6 Type C/EPC Class1 Gen2
BandwidthASR-030D: 902 – 928MHz | ASR-031D: 865.6 – 867.6MHz
*Please contact us for your local standard. It can be modified for other countries with firmware updates.
Output power316mW(25dBm)
Reading distanceAbout 2m / 6 feet(*2)
Polarization characteristicsCircularly Polarized Antenna
FunctionRead / Write / Lock / Kill
BatteryBattery CapacityBuilt-in rechargeable lithium-ion battery 700mAh
Continuous operation time7 hours or more. Approximately 40,000 scans. (*3)
Power SourceMagconn Cable (*4)
Charging timeAbout 2 hours (Built-in battery)(*5)
Key input2 Trigger keys
CommunicationInterfaceMFi on Lightning (*6)
AppearanceDimensions (W)x(D)x(H)63.7 × 9.7 × 117.2mm
Weight(with Battery)About 75g
MaterialPC
Casing colorWhite
LEDNon-blinking Blue LED: Connected with device (*7).
Blinking Blue LED: Reading RFID tag.
Non-blinking Red LED: Battery is charging.
Faint Red LED: Battery is fully charged
EnvironmentOperating environment-10~45℃, 20~85 % RH(Charge at 0 ℃ or more)
Storage environment-20~60℃, 10~95 % RH
IP RatingIP54 compliance
Anti-drop(Six-sided * 4 edge, once each) 1.5m/ 4.5 feet (*8)
CertificateTELEC / Apple Mfi / FCC / CE
RequirmentsDevicesiPhone 7/7 Plus/6/6 Plus/6s/6s Plus/5/5S/SE, iPod touch 5/6 gen, iPad mini 1/2/3/4, iPad Air 1/2, & iPad Air Pro 9.7 (*9)
OSiOS8.0 or later (except iOS9.2.x)
Bundled itemsMagconn cable / Earphone extension cable /manual

*1 The radio frequency bandwidth can be modified between these levels using software.
*2 It may depend on the type of IC tags and operating circumstances.
*3 iPhone’s battery will last about 4.5hrs/25,000 times continuous reading on iPhone’s default brightness setting. At which point AsReader’s battery will still have about 50% charge.
*4 Standard iPhone 1A charger is strongly recommended to be used when using Magconn cable.
*5 iPhone and AsReader batteries will charge simultaneously. iPhone and AsReader batteries will be recharged in 3.5 hrs and 2 hrs respectively in simultaneous recharging mode.
*6 SDK is available for free download.
*7 Blue LED will turn on after iPhone/iPod is connected. LED will turn off after the reading the first tag.
*8 iPhone screen could be broken, depending on the drop angle.
*9 It depends on the case, Please contact us for case availabilities.