ASR-010D

ASR-010D AsReader 1D Barcode Scanner

ASR-010D AsReader 1D Barcode Scanner

600Series
iPhone 5 / 5s / SE / 6 ​​/ 6s / 6Plus / 6s Plus / 7 / 7Plus, iPod touch 5th/6th Generation, iPad Air 2 / Pro 9.7

sled,best barcode scanner for iphone,best iphone barcode scanner,ipad compatible barcode scanner,ASR-010D of AsReader series is the modular type barcode scanner for many iOS devices, such as iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 5, iPhone 5s, iPhone SE and iPod touch 5 and 6 gen. Major 1D barcodes are supported.
ASR-010D
Model NameASR-010D
BarcodeScan EngineCCD linear image sensor 1,500Pixel (1D)
Minimum Resolution0.127mm (5mil)
Reading distance70~210mm (2.76″〜8.27″)(*1)
Reading anglePitch:±65° Roll: ±25° Skew motion:±50°(*1)
Reading codeJAN, UPC/EAN, CODE11, CODE39, CODE93,
CODE128, ITF(INTERLEAVED 2of5),DISCRETE 2of5,
CHINESE 2of5,MATRIX 2of5, CODABAR(NW-7),
MSI, GS1 DATABAR OMNIDIRECTIONAL,
GS1DATABAR LIMITED, GS1DATABAR EXPANDED
Light sourcesRED LED
BatteryBattery Capacity3.7V 700mAh Li-ion
Continuous operation time30,000 times(*2)
Power SourceMacon cable, DC Power cable(*3)
Charging timeAbout 2 hours (Built-in battery)(*4)
Key input2 trigger key
CommunicationInterfaceMFi on Lightning (*5)
AppearanceDimensions(W)×(D)×(H)63.7×9.7×117.2mm
Weight(with Battery)About 65g
MaterialPC
Case colorWhite
LEDNon-blinking Blue LED: Connected with device (*6).
Blinking Blue LED: Reading Barcode.
Non-blinking Red LED: Battery is charging.
Faint Red LED: Battery is fully charged
EnvironmentOperating environment-10~45 ℃, 20~85 % RH(Charge at 0 ℃ or more)
Storage environment-20~60℃, 10~95%RH
IP RatingIP54 compliance
Anti-drop(Six-sided * 4 edge, once each) 1.5m (*7)
CertificateApple MFi/ FCC/CE
RequirmentsDevicesiPhone 6/6 Plus/6S/6S Plus/5/5S/SE, iPod touch 5/6 gen, iPad mini 1/2/3/4, iPad Air 1/2 (*8)
OSiOS8.0 or later (except iOS9.2.x)
Bundled itemsMagconn cable / Earphone extension cable / Installation instructions / manual
  • May depend on barcode type.
  • Continuous operation time was tested with iPhone’s default brightness setting.
  • Standard iPhone 1A charger is strongly recommended to be used when using Magconn cable.
  • iPhone and AsReader batteries will charge simultaneously. iPhone and AsReader batteries will be recharged in 3.5 hrs and 2 hrs respectively in simultaneous recharging mode.
  • SDK is required and available for free download. Please contact us.
  • Blue LED will turn on after iPhone/iPod is connected. LED will turn off after the reading the first tag.
  • iPhone screen could be broken, depending on the drop angle.
  • It depends on the case, Please contact us for case availabilities.

Buy ASR-010D AsReader 1D Barcode Scanner from ID Vision Dubai for the best price.